Wet Dreams Ultra Baby Baller Vibrating Anal Plug by Hott Products

1. Remove the Ultra Baby Baller from its packaging.
2. Inspect the silicone and ABS surfaces for damage.
3. Verify that the product has a secure, appropriately flared base or other manufacturer-confirmed retrieval-safe design before any anal insertion.
4. Clean the product thoroughly before first use with a compatible toy cleaner.
5. Charge the device according to the manufacturer's instructions.
6. Make sure the charging connection is completely dry and properly sealed before use.
7. Test the vibration controls to familiarize yourself with the available settings.

Important Anal Safety Note: Although the product is marketed as an anal plug, the supplied specifications do not confirm its base shape, base width, or retrieval-safe design. Do not insert the product anally unless it has been verified to have an appropriately flared, retrieval-safe base.

Once the product's anal-safe base design has been verified, follow these general comfort and hygiene recommendations:

1. Clean the plug before use.
2. Apply a generous amount of water-based lubricant to the insertable portion and intended area of contact.
3. Begin with the lowest comfortable vibration setting.
4. Use slow, gentle movements and never force insertion.
5. Keep the retrieval-safe base outside the body at all times.
6. Explore the available vibration frequencies according to your comfort.
7. Stop immediately if pain, discomfort, or unusual pressure occurs.
8. Remove the plug gently using its intended retrieval-safe base.
9. Switch off the vibrator after use.
10. Clean and dry the product thoroughly before storage.

Comfort Note: The rectum does not produce its own lubrication, so sufficient lubricant is essential. Never continue through pain or discomfort.

The Wet Dreams Ultra Baby Baller offers 10 vibration frequencies, providing a variety of settings for personal exploration.

• Start with a gentle vibration setting.
• Explore the available frequencies gradually.
• Adjust the vibration according to your comfort and preferences.
• Take breaks during extended use.
• Switch off the device when finished.

Note: The manufacturer lists 10 frequencies but does not specify the exact frequency values or confirm whether the settings consist of speeds, patterns, or a combination of both.

The Ultra Baby Baller features a rechargeable 230mAh battery with an advertised charging time of approximately 120 minutes.

1. Make sure the vibrator is clean and completely dry before charging.
2. Locate the charging connection according to the included instructions.
3. Connect the compatible charging cable and an appropriate power source.
4. Allow approximately 120 minutes for charging, or follow the manufacturer's charging indicator.
5. Disconnect the charger once charging is complete.
6. Ensure the charging area is dry and any protective seal is properly secured before use.

Battery Care: Avoid charging near water or excessive heat. Do not use damaged charging equipment. Follow the manufacturer's instructions for charging and long-term battery maintenance.

Important: The charging connector type and whether a charging cable is included have not been confirmed.

1. Turn off the Ultra Baby Baller and disconnect it from any charging cable.
2. Inspect the silicone and ABS surfaces for damage.
3. Rinse or wipe the exterior according to the manufacturer's cleaning instructions.
4. Apply a gentle toy cleaner compatible with silicone and ABS.
5. Carefully clean all contours, seams, and the base area.
6. Remove remaining cleaner according to the cleaner's instructions.
7. Dry the plug thoroughly with a clean, soft cloth.
8. Allow the charging connection to dry completely before recharging or storing.

Cleaning Tip: Clean the plug before and after every use. Avoid abrasive tools, harsh solvents, boiling, and dishwasher cleaning because the product contains electronic components and a rechargeable battery.

The Wet Dreams Ultra Baby Baller carries a manufacturer-specified IPX7 waterproof rating.

IPX7 generally indicates protection against temporary immersion in freshwater under standardized test conditions, typically up to 1 metre for 30 minutes.

• Make sure charging connections and protective seals are properly secured before water exposure.
• Never charge the device while wet or near water.
• Do not expose the product to high-pressure water jets.
• Avoid prolonged immersion beyond the manufacturer's instructions.
• Rinse and dry the exterior after water exposure.
• Follow the manufacturer's guidance before using the device in a bath or shower.

Important: IPX7 does not guarantee protection against all liquids, high temperatures, or prolonged underwater use.

The Ultra Baby Baller is constructed from silicone and ABS.

• Use water-based lubricant for comfortable use.
• Avoid abrasive surfaces that could scratch the ABS components.
• Keep silicone surfaces clean and free from residue.
• Do not expose the product to excessive heat or prolonged direct sunlight.
• Avoid harsh chemicals and incompatible cleaning products.
• Inspect the material regularly for cracks, tears, or deterioration.

Staff Advice: Water-based lubricant is a practical choice for silicone accessories and avoids potential compatibility issues with some silicone-based lubricants.

Store the Wet Dreams Ultra Baby Baller in a clean, dry location away from direct sunlight, excessive heat, and sharp objects.

Keep the plug separated from heavy objects that could damage its compact housing or silicone surface.

Make sure the product is fully dry before storage, especially around the charging connection.

A protective storage pouch can help prevent dust buildup and surface scratches.

For extended storage, follow the manufacturer's rechargeable battery maintenance recommendations.

The Wet Dreams Ultra Baby Baller by Hott Products is a compact rechargeable vibrator marketed as an anal plug. It features 10 vibration frequencies, silicone and ABS construction, a 230mAh battery, and IPX7 waterproof protection.

The manufacturer lists 10 vibration frequencies. The exact breakdown of speeds and patterns has not been provided.

Yes. It features a built-in rechargeable 230mAh battery.

The manufacturer lists an approximate charging time of 120 minutes.

The advertised working time is approximately 40 minutes. Actual runtime may vary depending on the selected vibration setting and battery condition.

Yes. The manufacturer specifies an IPX7 waterproof rating, indicating protection against temporary immersion under standardized test conditions.

The manufacturer lists a noise specification of 50 dB or less. Perceived noise may vary depending on the vibration setting and surrounding environment.

The Wet Dreams Ultra Baby Baller is made from silicone and ABS, according to the manufacturer's specifications.

It measures approximately 43 x 43 x 72 mm, equivalent to about 1.69 x 1.69 x 2.83 inches. These are overall dimensions, not confirmed insertable measurements.

The manufacturer lists a weight of 58.5 grams, or approximately 2.06 ounces.

The supplied specifications do not confirm the base shape or width. Because an appropriately flared, retrieval-safe base is essential for anal insertion, verify the design before using the product anally.

Water-based lubricant is recommended for use with the silicone surface. Use sufficient lubricant for comfort.

Switch off and disconnect the device, then clean the exterior with a gentle toy cleaner compatible with silicone and ABS. Dry it thoroughly before charging or storing.

No. The Wet Dreams Ultra Baby Baller Vibrating Anal Plug by Hott Products is available online only through Source Adult Toys and is drop shipped.