Jock Silicone Cock & Ball Ring by XR

• Integrated Cock & Ball Ring: Designed for positioning around the penis and scrotum.
• Multi-Opening Construction: Three openings incorporated into one silicone accessory.
• Three Inner Diameters: 1.1", 1.4" and 1.5".
• Soft, Stretchy Silicone: Flexible construction designed to accommodate comfortable positioning.
• Body-Safe Material: Manufacturer-described body-safe silicone.
• Discreet Skin-Tone Design: Neutral colouring for a subtle appearance.
• Supportive Fit: Provides controlled pressure when appropriately sized.
• Non-Vibrating: Traditional silicone design without electronic components.
• Water-Based Lubricant Compatible: Manufacturer recommends water-based lubricants only.
• Reusable: Designed for repeated use with proper cleaning and care.
• Easy Maintenance: Manufacturer recommends washing with warm water and mild soap after use.
• Solo or Partner Use: Suitable for adult personal wellness experiences.

The Jock Silicone Cock & Ball Ring by XR features a specialized construction that differs from traditional single-opening cock rings.

Its integrated design allows the penis and scrotum to be positioned separately, with multiple openings incorporated into one flexible silicone accessory.

Design Highlights

• Integrated cock and ball positioning.
• Three openings within one accessory.
• Flexible silicone construction.
• Skin-tone-inspired appearance.
• Non-vibrating design.
• Reusable with appropriate cleaning.

The manufacturer recommends applying the accessory while the penis is flaccid or partially erect to make positioning easier.

Comfort Note: Because this design surrounds sensitive anatomical areas, it is especially important to ensure that all openings fit comfortably and that the entire accessory can be removed quickly without force.

The Jock Silicone Cock & Ball Ring features three openings with different inner diameters.

Opening Inner Diameters

• Opening 1: 1.1 inches (approximately 28 mm).
• Opening 2: 1.4 inches (approximately 36 mm).
• Opening 3: 1.5 inches (approximately 38 mm).

These measurements refer to the openings in the integrated cock and ball ring, not three separate rings.

Measurement Note: The manufacturer does not specify which measurement corresponds to each anatomical opening, nor does it provide maximum stretch dimensions or overall product measurements.

Fit Tip: Review the product images and manufacturer's instructions before use. Do not force any opening over an area that cannot pass through comfortably.

The Jock Silicone Cock & Ball Ring is crafted from high-quality, flexible silicone designed for intimate contact.

The soft material allows the accessory to stretch during application while maintaining its intended shape.

Material Benefits

• Soft silicone surface.
• Flexible and stretchable construction.
• Manufacturer-described body-safe material.
• Reusable design.
• Easy cleaning with warm water and mild soap.
• Compatible with water-based lubricants as recommended.

Material Note: The manufacturer does not specify the silicone grade, maximum stretch capacity, material hardness or thickness.

Although silicone is flexible, excessive stretching can damage the material or create an uncomfortable fit. Inspect the accessory before every use.

The Jock Silicone Cock & Ball Ring features a neutral, skin-tone-inspired colour designed for a more understated appearance.

Its discreet styling makes it an alternative to brightly coloured or highly decorative cock rings.

Design Benefits

• Neutral colour styling.
• Discreet appearance.
• Minimalist silicone construction.
• No batteries or electronic components.
• Integrated multi-opening design.

Colour Note: Skin tones vary, and the product's colour may not match every wearer. Exact colour names and available variations were not included in the supplied specifications.

Traditional cock rings are designed to apply temporary pressure around the base of the penis, which can influence venous blood flow.

The manufacturer promotes the Jock Silicone Cock & Ball Ring as an accessory intended to help maintain firmness and extend intimate experiences.

Intended Benefits

• Provides controlled compression when appropriately fitted.
• Designed to help some users maintain firmness.
• Offers additional sensation through supportive positioning.
• Combines penile and scrotal positioning in one accessory.
• Provides a flexible alternative to rigid constriction rings.

Important: Individual results vary. Greater pressure does not necessarily improve performance and may cause injury or circulation problems.

This accessory is not a medical treatment for erectile dysfunction, premature ejaculation or other sexual health conditions.

The Jock Silicone Cock & Ball Ring features a traditional non-vibrating design without electronic components.

Benefits

• No batteries required.
• No charging needed.
• No electronic controls.
• Flexible silicone material.
• Simple cleaning and maintenance.
• Reusable construction.

Its straightforward design makes it suitable for adults who prefer a traditional cock and ball ring without additional vibration functions.

• Brand: XR.
• Collection: Jock.
• Product Name: Jock Silicone Cock & Ball Ring.
• Product Type: Integrated silicone cock and ball ring.
• Number of Accessories: 1 integrated ring.
• Number of Openings: 3.
• Opening Inner Diameter 1: 1.1 inches (approximately 28 mm).
• Opening Inner Diameter 2: 1.4 inches (approximately 36 mm).
• Opening Inner Diameter 3: 1.5 inches (approximately 38 mm).
• Material: Silicone.
• Material Description: Soft, stretchy and manufacturer-described body-safe silicone.
• Colour: Neutral, skin-tone-inspired.
• Design: Multi-opening cock and ball positioning.
• Vibration: None.
• Power Source: Not required.
• Recommended Lubricant: Water-based only.
• Cleaning: Warm water and mild soap.
• Maximum Wear Time: No more than 30 minutes, according to the manufacturer.
• Reusable: Yes, with proper care.

Product Note: Overall dimensions, thickness, maximum stretch measurements, exact colour options and packaging dimensions were not included in the supplied specifications.

• 1 Jock Silicone Cock & Ball Ring by XR.

Design Note: The three listed measurements refer to openings in one integrated accessory. This is not a three-piece cock ring set.

Lubricant and additional accessories are not listed as included.

Before First Use

1. Read the manufacturer's instructions.
2. Wash the ring with warm water and mild soap.
3. Rinse thoroughly and allow to dry.
4. Inspect the silicone for tears, cracks or damage.
5. Review the three openings and their intended positioning.
6. Have a suitable water-based lubricant available.

Applying the Cock & Ball Ring

1. Begin while the penis is flaccid or partially erect.
2. Apply a small amount of water-based lubricant to the penis, scrotum and inside of the ring openings.
3. Gently guide the penis through the designated shaft opening.
4. Following the manufacturer's instructions, carefully position the scrotum through the designated opening, one testicle at a time if comfortable.
5. Do not force the silicone or continue if any part of the process causes pain or pinching.
6. Confirm that the accessory sits comfortably and can be removed easily.
7. Limit continuous wear to 20–30 minutes or less.
8. Remove immediately if discomfort or circulation changes occur.

Removing the Ring

1. Stop activity before removal.
2. Apply additional water-based lubricant if needed.
3. Gently stretch the silicone to relieve pressure.
4. Carefully remove the scrotum and penis from their respective openings without pulling or forcing the material.
5. Wash with warm water and mild soap.
6. Dry thoroughly before storage.

Important: Never sleep while wearing the ring. Do not exceed the manufacturer's 30-minute maximum wear time, and remove sooner if any discomfort occurs.

If the accessory becomes stuck or cannot be removed without force, seek urgent medical assistance.

The manufacturer recommends using water-based lubricants only with the Jock Silicone Cock & Ball Ring.

A suitable water-based lubricant can help reduce friction and make the ring easier to apply and remove.

Lubricant Recommendations

• Use water-based lubricants only.
• Apply lubricant to the shaft and scrotum before positioning.
• Apply a small amount to the inside of the ring openings.
• Reapply as needed for comfortable removal.
• Avoid silicone-based lubricants unless the manufacturer explicitly confirms compatibility.

Explore our Water-Based Lubricants collection for suitable options.

Compatibility Note: The manufacturer's water-based-only recommendation should be followed to help maintain the silicone material.

Proper cleaning and storage help maintain the condition of reusable silicone accessories.

Cleaning Instructions

1. Remove the ring immediately after use.
2. Wash thoroughly with warm water and mild soap, as recommended by the manufacturer.
3. Pay attention to all three openings and the areas between them.
4. Rinse thoroughly to remove soap residue.
5. Allow the accessory to dry completely.
6. Inspect for tears or damage before storage.

Storage Tips

• Store in a clean, dry location.
• Keep away from excessive heat and direct sunlight.
• Do not store while stretched.
• Keep away from sharp objects that could damage the silicone.
• Avoid prolonged contact with incompatible materials.
• Replace the accessory if the silicone develops cracks, tears or changes in elasticity.

For additional cleaning options, explore our Toy Cleaners collection.

Because cock and ball rings apply pressure to sensitive tissue, correct positioning, comfortable fit and limited wear time are essential.

Important Safety Guidelines

• Read the manufacturer's instructions before use.
• Only use the ring if all openings fit comfortably.
• Never force the penis or scrotum through an opening.
• Limit continuous wear to 20–30 minutes or less.
• Remove immediately if pain, numbness, tingling, coldness, swelling or unusual colour changes occur.
• Never sleep while wearing the ring.
• Do not use while intoxicated or unable to monitor discomfort.
• Do not use on injured, irritated or broken skin.
• Do not combine with additional constriction rings.
• Do not use a damaged or excessively stretched ring.
• Use water-based lubricant for comfortable application and removal.
• Do not continue use if the ring feels excessively tight.

Medical Considerations

If you have a circulation disorder, reduced genital sensation, a bleeding disorder or another condition that could affect safe use, consult a qualified healthcare professional before using a constriction ring.

Emergency Note: If the ring becomes stuck or causes severe pain, significant swelling or persistent changes in colour or sensation, seek urgent medical assistance.

Important: This product is not intended to diagnose, treat or cure erectile dysfunction, premature ejaculation or any other medical condition.

The Jock Silicone Cock & Ball Ring by XR is a good option for adults who prefer a traditional non-vibrating accessory with a more structured, multi-opening design.

Before use, familiarize yourself with the three openings and apply a suitable water-based lubricant to help reduce friction during positioning.

Always prioritize comfort over pressure. A properly fitted ring should never cause pain, numbness or unusual colour changes, and it should be easy to remove at any time.

For safe use, limit continuous wear to 20–30 minutes or less and never sleep while wearing the accessory.

Water-Based Lubricants

The manufacturer recommends water-based lubricants only. Explore suitable options to help with comfortable application and removal.

Shop Water-Based Lubricants

Toy Cleaners

Maintain your reusable silicone accessory with suitable personal wellness cleaning products.

Shop Toy Cleaners

What is the Jock Silicone Cock & Ball Ring by XR?
It is a flexible silicone cock and ball ring featuring three integrated openings designed for positioning around the penis and scrotum.

How many rings are included?
The product is one integrated cock and ball ring with three openings, not a three-piece ring set.

What are the opening measurements?
The inner diameters are 1.1 inches, 1.4 inches and 1.5 inches.

Which opening is for the penis?
The manufacturer describes separate positioning for the penis and scrotum but does not assign the supplied measurements to specific openings. Refer to the product images and included instructions.

What material is the ring made from?
The ring is made from soft, stretchy silicone.

Is the silicone body-safe?
Yes. The manufacturer describes the silicone as body-safe.

Is the ring stretchy?
Yes. The silicone is designed to stretch during application and removal.

What colour is the ring?
The manufacturer describes a discreet, skin-tone-inspired colour.

Does the ring vibrate?
No. This is a traditional non-vibrating silicone cock and ball ring.

Does the ring require batteries?
No. The ring has no electronic components.

How do I put on the ring?
The manufacturer recommends starting while flaccid or partially erect, applying water-based lubricant and carefully positioning the penis and scrotum through their designated openings.

Can the ring be worn around both the penis and scrotum?
Yes. Its integrated design is intended for penile and scrotal positioning.

How long can I wear the ring?
The manufacturer specifies no longer than 30 minutes for initial use. For safety, limit continuous wear to 20–30 minutes or less and remove sooner if uncomfortable.

Can I sleep while wearing the ring?
No. Never sleep while wearing a constriction ring.

What lubricant should I use?
The manufacturer recommends water-based lubricants only.

Can I use silicone-based lubricant?
Silicone-based lubricant is not recommended unless the manufacturer explicitly confirms compatibility.

Can the ring help maintain firmness?
Cock rings are designed to temporarily influence blood flow and may help some users maintain firmness. Individual results vary.

Will the ring help me last longer?
The manufacturer promotes extended performance as an intended benefit, but individual experiences vary and results are not guaranteed.

What should I do if the ring feels too tight?
Remove it immediately. Do not continue using a ring that causes pain, numbness, swelling or unusual colour changes.

What if I cannot remove the ring?
If the ring becomes stuck or cannot be removed without force, seek urgent medical assistance.

How do I clean the ring?
The manufacturer recommends washing with warm water and mild soap after use. Rinse thoroughly and dry completely before storage.

Is the ring reusable?
Yes. The silicone accessory is designed for repeated use with proper cleaning and care.

Can I wear it with another cock ring?
Combining constriction rings is not recommended because it may increase pressure and circulation risks.

Where can I find suitable water-based lubricant?
Browse our Water-Based Lubricants collection at Source Adult Toys.

Where can I find toy cleaning products?
Explore our Toy Cleaners collection for additional cleaning and maintenance options.