Fleshlight On A Mission Toy Mount

Available Online Only, item is drop shipped.

Fleshlight On A Mission Toy Mount by Liberator

Enjoy comfortable hands-free Fleshlight positioning with the Fleshlight On A Mission Toy Mount by Liberator. Designed primarily for face-to-face positioning, this supportive mount features a dedicated slot that holds a compatible Fleshlight at a convenient angle while freeing your hands.

Made with fully supportive polyurethane foam, On A Mission provides a sturdy foundation that maintains its shape better than ordinary bedroom pillows. The elongated 27 x 9 x 10-inch profile can also double as a positioning pillow when the Fleshlight isn't installed.

The versatile design isn't limited to one orientation. In addition to its primary horizontal setup, the manufacturer describes On A Mission as suitable for positioning against a stable wall for a more upright configuration. Its supportive foam shape can also be used beneath the torso or other areas where additional elevation is preferred.

The exterior is finished in smooth pleather faux leather for a furniture-inspired appearance and straightforward cleanup. The manufacturer recommends cleaning the surface with soap and water after use.

Find a compatible toy in our Fleshlights collection and browse care products and lubricants in our Fleshlight Accessories & Lubricants collection.

Please Note: Fleshlight toy is not included and is sold separately.

Why It's So Good

• Designed for Fleshlight Products: Purpose-built slot holds a compatible Fleshlight in position.
• Hands-Free Setup: Keeps the Fleshlight supported without requiring you to continuously hold the case.
• Face-to-Face Positioning: Primarily designed around a horizontal, face-to-face setup.
• Upright Positioning Option: Manufacturer also describes using the mount against a stable wall for an alternative orientation.
• Dedicated Mounting Slot: Strategically positioned opening helps keep a compatible Fleshlight securely located.
• Fully Supportive Foam: Polyurethane core provides a firm structural foundation.
• Positioning Pillow: Supportive shape can be used for body elevation even without a Fleshlight installed.
• 27-Inch Length: Elongated profile provides a substantial body-support surface.
• 10-Inch Height: Creates useful elevation while maintaining a relatively narrow footprint.
• 9-Inch Width: Narrow profile makes the mount easier to position on a bed or floor.
• Easy-Care Pleather: Smooth faux-leather exterior can be wiped down after use.
• Polyester Liner: Inner layer separates the exterior from the structural foam.
• Made in the U.S.A.: Proudly manufactured in the United States according to the supplied information.
• Discreet Packaging: Ships in a plain, unmarked brown box.

Materials, Measurements & Specifications

• Brand: Liberator
• Product: Fleshlight On A Mission Toy Mount
• Product Type: Fleshlight mount and positioning pillow
• Size: One Size
• Material: Pleather / faux leather
• Cover: Pleather
• Liner: Polyester
• Foam: Fully supportive polyurethane
• Dimensions: 27 x 9 x 10 in
• Metric Dimensions: Approximately 68.6 x 22.9 x 25.4 cm
• Length: 27 in / approximately 68.6 cm
• Width: 9 in / approximately 22.9 cm
• Height: 10 in / approximately 25.4 cm
• Primary Compatibility: Compatible Fleshlight products
• Fleshlight Included: No
• Made In: U.S.A.
• Packaging: Plain, unmarked brown box

Specification Note: Exact product weight, numerical foam density, Fleshlight-slot measurements, maximum compatible case dimensions and maximum supported weight were not included in the supplied specifications and have not been estimated.

Purpose-Built Fleshlight Mount

On A Mission incorporates a dedicated Fleshlight slot directly into its supportive foam structure. Once a compatible Fleshlight is securely positioned, the mount supports the case so your hands don't have to.

The slot is positioned to provide a practical angle for the mount's primary horizontal configuration while the surrounding foam creates a stable foundation.

Fleshlight is sold separately. Browse available options in our Fleshlights collection.

27 x 9 x 10-Inch Profile

At 27 inches long, 9 inches wide and 10 inches high, On A Mission has a longer and narrower profile than many compact toy mounts.

The 27-inch length provides additional body-support area, while the 10-inch height creates useful elevation. Its relatively narrow 9-inch width keeps the overall footprint manageable.

More Than a Fleshlight Mount

Remove the Fleshlight and On A Mission can double as a supportive positioning pillow. Its firm polyurethane foam can be positioned beneath the torso or other areas where additional elevation and support are wanted.

This multipurpose construction gives the mount functionality even when a toy isn't installed.

Alternative Upright Positioning

The manufacturer also describes positioning On A Mission against a wall for an upright mounting configuration.

When using it this way, place the mount only against a stable surface and confirm that both the mount and Fleshlight remain secure before applying substantial pressure. Do not use it against an unstable or easily damaged surface.

Fully Supportive Polyurethane Foam

The structural core is made from fully supportive polyurethane foam. Unlike ordinary pillows that can compress or shift significantly, the foam is designed to maintain the mount's functional shape and the position of the Fleshlight slot.

This firm construction also allows On A Mission to function as a positioning support when used without a toy.

Easy-Care Pleather Exterior

The mount is finished in pleather faux leather, providing a smooth surface that's straightforward to maintain.

The supplied manufacturer information recommends cleaning with soap and water. Remove the Fleshlight first, clean the mount separately and allow both products to dry completely before storage.

Three-Layer Construction

1. Fully Supportive Polyurethane Foam
Creates the structural foundation, maintains the mounting angle and provides body support.

2. Polyester Liner
Provides an additional layer between the foam core and exterior.

3. Pleather Exterior
Creates a smooth faux-leather finishing surface that's designed for straightforward cleanup.

Staff Tip

Test both the mount and Fleshlight before settling into position. Install your Fleshlight first and apply gentle pressure from several directions to confirm a secure fit. If you're experimenting with the upright wall-supported configuration, pay particular attention to the surface beneath the mount so it cannot unexpectedly slide.

Recommended Accessories

• Fleshlights: Find a compatible toy in our Fleshlights collection.
• Fleshlight Accessories & Lubricants: Browse compatible care products and lubricants in our Fleshlight Accessories & Lubricants collection.
• Toy Cleaners: Explore additional cleaning options in our Toy Cleaners collection.
• Water-Based Lubricants: Browse versatile formulas in our Water-Based Lubricants collection.

FAQ

What is Fleshlight On A Mission?
On A Mission is a Liberator positioning mount designed to hold a compatible Fleshlight for hands-free use while also functioning as a supportive positioning pillow.

Who makes On A Mission?
The supplied specifications identify Liberator as the brand. The mount is designed for compatible Fleshlight products.

Is a Fleshlight included?
No. Fleshlight is sold separately.

What are the dimensions?
On A Mission measures 27 x 9 x 10 inches, approximately 68.6 x 22.9 x 25.4 cm.

How tall is the mount?
The supplied dimensions list a 10-inch height, approximately 25.4 cm.

How long is it?
On A Mission measures 27 inches long, approximately 68.6 cm.

How wide is it?
The mount measures 9 inches wide, approximately 22.9 cm.

Will every Fleshlight fit?
The mount is designed for Fleshlight products, but exact slot dimensions were not supplied. Compatibility with every Fleshlight case or model should therefore be checked rather than assumed.

Can it be used without a Fleshlight?
Yes. Its fully supportive foam shape can also function as a positioning pillow when the Fleshlight is removed.

Can it be positioned against a wall?
The manufacturer specifically describes using On A Mission against a wall for an alternative upright configuration. Use only a stable surface and make sure the mount cannot unexpectedly slide.

What is the foam made from?
The structural core is fully supportive polyurethane foam.

What is the exterior material?
The supplied specifications identify the material as pleather, a faux-leather material.

How do I clean On A Mission?
The manufacturer recommends cleaning the exterior with soap and water. Remove the Fleshlight first and clean it separately according to its own care instructions.

Is the pleather cover machine washable?
The supplied specification table labels the pleather cover as machine washable, while the descriptive product information specifically recommends cleaning with soap and water. Follow the current sewn-in Liberator care label for the exact version received rather than assuming machine washing is appropriate.

Is it made in the USA?
Yes. The supplied manufacturer information states that On A Mission is made in the U.S.A.

Does it ship discreetly?
Yes. The supplied specifications state that it ships in a plain, unmarked brown box.

What is the maximum supported weight?
A maximum supported weight was not included in the supplied specifications and has not been estimated.

What lubricant should I use with a Fleshlight?
Follow the recommendations for your specific Fleshlight model. Water-based lubricants are commonly appropriate for Fleshlight-style sleeves. Browse our Fleshlight Accessories & Lubricants and Water-Based Lubricants collections.

Where can I find compatible Fleshlight products?
Browse our Fleshlights collection at Source Adult Toys.

Is delivery available in Canada?
Yes. The Fleshlight On A Mission Toy Mount by Liberator is available from Source Adult Toys with delivery options across Canada.