Finger Fest Dildo The Shocker by Hott Products

1. Remove the Finger Fest The Shocker from its packaging and inspect the silicone surface and suction cup base.
2. Wash the product thoroughly before first use with a suitable toy cleaner.
3. Apply a generous amount of water-based lubricant to the finger-shaped surface and intended area of contact.
4. Begin slowly, allowing time to become comfortable with the unique contours and maximum width.
5. Use controlled movements and adjust the flexible shaft gently as needed.
6. For hands-free positioning, attach the suction cup base to a clean, smooth, nonporous surface.
7. Test the suction cup's hold before use.
8. If using a strap-on harness, confirm that the base fits securely within the harness opening.
9. After use, clean the entire product thoroughly and allow it to dry completely before storage.

Safety Note: The Shocker features a substantial maximum insertable width of 2 inches. Use sufficient lubricant, begin gradually, and never force insertion or continue through pain.

Important: The manufacturer has not provided the suction cup base dimensions or specifically confirmed anal-use safety. Do not assume the base is suitably flared and retrieval-safe for anal insertion without verifying its design.

1. Inspect the dildo for any tears, cracks, or surface damage before cleaning.
2. Rinse the product with lukewarm water.
3. Apply a gentle toy cleaner suitable for silicone accessories.
4. Carefully clean around the individual finger shapes, sculpted contours, and any areas where residue may collect.
5. Pay special attention to the suction cup base.
6. Rinse thoroughly according to the cleaner's instructions.
7. Allow the product to dry completely before storage.

Care Note: Although the manufacturer describes The Shocker as waterproof, avoid harsh solvents, abrasive scrubbers, and excessive heat. Do not boil or sterilize the product unless the manufacturer confirms that its complete construction is suitable for that method.

The Finger Fest The Shocker features a strong suction cup base designed for hands-free positioning.

• Choose a clean, smooth, nonporous mounting surface.
• Ensure both the suction cup and mounting surface are free from dirt and residue.
• Press the suction cup firmly into position.
• Test its hold before use and check it regularly during movement.
• Avoid porous, rough, uneven, or dirty surfaces that may weaken suction.
• Do not rely on the suction cup to support body weight.
• Clean and dry the suction cup thoroughly after use.

Hott Products identifies The Shocker as strap-on compatible, allowing it to be paired with suitably fitted harness accessories.

Compatibility depends on the harness opening and the dildo's suction cup base dimensions.

Because the manufacturer has not provided the base diameter, compatibility with every harness cannot be guaranteed.

Before use, make sure the base is securely supported by the harness and cannot slip through the opening.

Follow the harness manufacturer's fitting instructions and discontinue use if the attachment becomes unstable.

The Finger Fest The Shocker is described by the manufacturer as waterproof.

• Clean the silicone exterior with lukewarm water and a suitable toy cleaner.
• Pay attention to the sculpted finger details and areas around the suction cup base.
• Inspect the surface for signs of wear or damage before each use.
• Avoid sharp objects that could tear or puncture the silicone.
• Do not expose the product to boiling water or extreme temperatures unless approved by the manufacturer.
• Dry thoroughly before storing.

Note: A specific waterproof rating has not been supplied.

Store the Finger Fest The Shocker in a clean, dry location away from direct sunlight, excessive heat, and prolonged contact with other soft personal accessories.

A separate protective storage bag can help prevent dust buildup and unwanted material contact.

Water-based lubricant is recommended for silicone accessories. Avoid silicone-based lubricants unless compatibility is confirmed by the manufacturer.

Avoid storing the flexible shaft in a sharply bent or compressed position for extended periods.

Inspect the finger-shaped contours and suction cup base before every use. Discontinue use if the silicone becomes torn, cracked, sticky, or otherwise damaged.

The Finger Fest The Shocker by Hott Products is a fantasy dildo featuring a distinctive finger-shaped design, flexible silicone shaft, strong suction cup base, and strap-on compatibility.

The overall length is 7.9 inches (20 cm), including the suction cup base. The advertised insertable length is 4.3 inches (11 cm).

The manufacturer lists a maximum insertable width of 2 inches (5 cm).

It is made from silicone, which the manufacturer describes as body-safe and phthalate-free.

Yes. The manufacturer specifies a flexible shaft. Adjust it gently and avoid forceful bending or twisting.

Yes. It features a strong suction cup base designed for hands-free positioning on suitable smooth, nonporous surfaces.

Yes. Hott Products lists it as strap-on compatible. Actual compatibility depends on the harness opening and the dimensions of the dildo's base.

Yes. The manufacturer describes The Shocker as waterproof. A specific waterproof rating has not been provided.

Water-based lubricant is recommended for silicone accessories. Avoid silicone-based lubricants unless compatibility is confirmed by the manufacturer.

The manufacturer lists the product weight as 411 grams.

Use lukewarm water and a gentle toy cleaner suitable for silicone, paying particular attention to the sculpted finger details and suction cup base. Rinse and dry thoroughly before storage.

No. Finger Fest The Shocker Dildo by Hott Products is available online only through Source Adult Toys and is drop shipped.