Gender-X Teamwork Set

Inspect both devices, the plug's rotating-bead section, safety-base handle, C-ring, charging contacts, and remote for damage. Clean the contact surfaces before first use. Charge the rechargeable components according to the manufacturer's instructions and confirm that the included CR2032 battery is correctly installed in the remote.

Apply a generous amount of compatible water-based lubricant and position the plug gradually without forcing insertion. The rounded tip and tapered shaft are designed for controlled positioning. Keep the widened safety base outside the body and stop use if pain, numbness, or unusual pressure occurs.

The plug features rotating beads near the base with 3 speed settings. Begin with the lowest speed and increase gradually if comfortable. Do not obstruct the moving mechanism or force the device against resistance. Follow the manufacturer's operating instructions.

Position the C-ring according to the manufacturer's instructions, ensuring a comfortable fit without excessive pressure. Do not use a ring that feels painfully tight or causes numbness, coldness, swelling, or changes in skin colour. Remove it immediately if circulation or comfort is affected. Limit continuous wear and do not fall asleep while wearing it.

The manufacturer specifies that two motors can be controlled separately using the included remote. Both the plug and C-ring offer 10 vibration speeds and patterns. Refer to the supplied instructions for the exact button functions and how the bead-rotation settings are selected.

The remote has a manufacturer-listed range of up to 30 feet (approximately 9.14 metres). Actual performance may vary depending on obstacles, surroundings, and battery condition. Remote operation should always be consensual.

Use a generous amount of compatible water-based lubricant with the silicone plug. Avoid silicone-based lubricants unless the manufacturer confirms compatibility with the set's materials. Reapply as needed.

Recharge the applicable devices using the included magnetic USB charging cable according to the manufacturer's instructions. Ensure all charging contacts are completely dry before connecting power. Never charge while wet or in use. The supplied specifications do not clarify whether both devices have separate charging connections or share one charging method.

The remote uses one included CR2032 coin-cell battery. Follow the manufacturer's instructions for replacement and correct polarity. Keep loose and used coin batteries away from children and pets, and dispose of them responsibly.

The manufacturer describes the set as waterproof but does not provide an IP rating or explicitly confirm submersibility. Follow the supplied instructions for permitted water exposure. Keep the remote dry unless the manufacturer separately confirms its water resistance.

Clean before and after every use with warm water and mild soap or a silicone-compatible toy cleaner, following the manufacturer's water-exposure guidance. Pay attention to the textured tip, shaft, rotating-bead section, and safety-base handle. Do not force cleaning tools into the moving mechanism. Rinse as directed and dry thoroughly.

Clean the C-ring according to the manufacturer's material and water-care instructions, then dry completely. Wipe the remote with a slightly damp cloth, keeping moisture away from the battery compartment and openings. Do not immerse the remote unless its water resistance is confirmed.

The plug is described as having a widened safety-base handle. Before anal use, verify that the base is secure, sufficiently wide to remain outside the body, and appropriate for the intended use. Never insert the handle. Discontinue use if the base becomes loose or damaged.

Clean both devices before and after use and follow appropriate barrier and hygiene precautions when sharing or changing between body areas. Never transfer a toy from anal to vaginal use without appropriate cleaning and a fresh barrier where applicable.

Store both devices clean and dry in a cool location away from direct sunlight and excessive heat. Protect the rotating-bead mechanism from impact and avoid crushing or deforming the C-ring. Keep the remote, charging cable, and devices organized in separate protective compartments when possible.

The set includes a vibrating plug, a vibrating C-ring, a wireless remote, a magnetic USB charging cable, and an included CR2032 remote battery.

Both the plug and the C-ring offer 10 vibration speeds and patterns.

Yes. The manufacturer specifies two motors controlled independently by the wireless remote.

Yes. The plug includes rotating beads near its base with 3 adjustable rotation speeds.

The manufacturer lists an insertable length of 4.5 inches (11.43 cm).

The listed insertable diameter is 1.56 inches (3.96 cm).

The plug measures 5.5 inches high, 3.42 inches deep, and 1.56 inches wide.

The C-ring measures 2.75 inches high, 2.75 inches deep, and 1.32 inches wide. The manufacturer has not separately specified its internal opening diameter.

Yes. The plug is described as having a widened safety-base handle. Check that it provides secure external retention before anal use.

The manufacturer lists a maximum range of 30 feet (approximately 9.14 metres). Actual range may vary depending on the environment.

Yes. The set is described as magnetic USB rechargeable and includes a charging cable. Refer to the supplied instructions for the charging arrangement of each device.

The remote uses one CR2032 battery, which is included.

The manufacturer describes the set as waterproof. An IP rating and explicit submersibility confirmation were not provided, so follow the supplied water-care instructions and keep the remote dry unless otherwise confirmed.

The manufacturer lists phthalate-free and latex-free silicone and ABS plastic.

The supplied measurements describe the ring's overall size, not its internal opening. Check the manufacturer's fit guidance before use. Remove the ring immediately if it causes pain, numbness, swelling, coldness, or discolouration.

A compatible water-based lubricant is recommended for use with the silicone plug.

Use mild soap and water or a silicone-compatible toy cleaner as permitted by the manufacturer's instructions. Clean around the rotating-bead section carefully and dry all components completely before charging or storage. Keep the remote dry.

No. This product is available online only and is drop shipped.